GST Advantage EP
High performance industrial gas and steam turbine oils
Texaco® GST Advantage EP are high performance oils, formulated with VARTECH® Technology, which is advanced chemistry combined with premium base oils and designed to inhibit varnish formation and help maintain peak performance, reliability and productivity.
Applications
GST Advantage EP oils are designed to meet the critical lubrication demands of:
- Combined cycle turbines
- Large heavy duty industrial gas turbines
- Gas and steam turbines
- Hydraulic Turbines
- Rotating machinery in gas and steam combined-cycle cogeneration units
- They are recommended for many other industrial applications including hydraulic/controller liquids, turbo and process-gas screw compressor sets
- Bath and circulating systems supplying moderately loaded gear sets, low pressure hydraulic systems, vacuum pumps, rolling element bearings, machine tools, conveyors and electrical motors
- Air compressors, turbo-blowers and centrifugal pumps requiring a rust and oxidation inhibited anti-wear oil
Customer benefits
- Premium base oil technology in an ashless, zinc-free design offers oxidation stability and long service life at high temperatures
- High viscosity index helps ensure minimum viscosity change when variations in temperature occur
- Formulated for minimal sludge and varnish formation
- Offers rapid water separation and helps keep water in oil to a minimum
- Promotes rust and corrosion protection
- Designed for resistance to foam formation, helping prevent reservoir overflow
- Quick air release helps minimise pump cavitation in systems with high circulation rates and small reservoirs
Approvals, performance and suitable for use
| ISO 32 | ISO 46 | ISO 68 | |
| Ansaldo Energia AD00020487 (previously Ansaldo Energia G-HTCT689029) |
A | A | |
| Ansaldo Energia TGO2-0171-E00000/C, AE64.3A | A | A | |
| SIEMENS TLV 9013 04 / 05 | A | A | |
| MAN Energy Solutions 10000494596 | A | A | A |
| TGM Kanis WN000023 Rev. 15 | A | A | |
| ASTM 4304 - type I / type II / type III |
M | M | M |
| ANSI/AGMA 90005-E02-R&O / EP |
M | M | M |
| BS-489: 1999 |
M | M | M |
| China National Std GB 11120-2011 L-TSA Type A / Type B |
M | M | M |
| China National Std GB 11120-2011 L-TSE Type A (Type B not existed) |
M | M | M |
| China National Std GB 11120-2011 L-TGA / L-TGE |
M | M | M |
| DIN 51515 Pt. 1 2010-02, TD32, 46, 68,100 |
M | M | M |
| DIN 51515 Pt. 2, 2010-02, TG32&46 |
M | M | |
| GEC Alstom NBA P50001A / P50003A |
M | M | |
| GEK 101941A / 107395A / 120498 / 27070 |
M | ||
| GEK 28143B |
M | M | M |
| GEK 28143B, AW |
M | M | |
| GEK 32568e-P |
M | ||
| GEK 46506 d, e |
M | ||
| GE Oil and Gas, ITN52220.02 Table 1 Section 1, 2, 3 |
M | M | M |
| GE Oil and Gas, ITN52220.03 Par 16, Table 1 Section 1, 2, 4 |
M | M | M |
| ISO 8068 AR / B / L-TSA / L-TGA / L-TSE / L-TGE |
M | M | M |
| JIS K2213 type 2 |
M | M | M |
| Siemens MAT 812101 / 812106 / 812108 |
M | ||
| Siemens MAT 812102 / 812107 / 812109 |
M | ||
| Siemens Westinghouse PD-55125Z3 |
M | ||
| SOLAR ES-9-224 Class II W |
M | M | |
| Toshiba LST-GMH-XUTW2-0005 Rev. 2 |
M | ||
| Skoda Power TP0010P |
M | M | |
| Cincinnati Machine (MAG) P-38 |
M | ||
| Cincinnati Machine (MAG) P-55 |
M | ||
| Cincinnati Machine (MAG) P-63 |
M | ||
| ASTM D6158-HL |
M | M | M |
| ISO 11158-HM |
M | M | M |
| DIN 51524/1 HL |
M | M | M |
A: Approved
M: Meets or exceeds requirements
Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices
