Multifak EP

Multifak EP greases have high load-carrying capacity and, therefore, provide good protection of lubricated parts against wear. They provide good lubrication in the presence of water, protect bearing surfaces againstcorrosion, and have excellent resistance to oxidation, which supports long life in storage and in use.
Multifak EP greases are work stable. They resist separation or throw out from antifriction bearings. They have low oil bleeding tendency under pressure and are pumpable at low temperatures.
Multifak EP greases are suitable for use in typical centralized lubrication systems. They can satisfy a wide range of industrial and marine grease applications.
Typical applications include:
- General Machinery - plain, antifriction, roller, and needle bearings
- Construction equipment
- Conveyors and run-out rolls
- Crusher, shaker, or classifier screen bearings
- Chassis lubrication
- Deck equipment
Multifak EP greases are recommended for both plain and antifriction bearings and particularly for bearings subjected to shock loading. NLGI grades 1 and 2 comply with Timken’s recommendation for this service.
Multifak EP greases deliver value through:
- Good water resistance
Resistance to washout of bearings.
- Good corrosion protection
Inhibited to protect bearing surfaces.
- Good oxidation stability
Helps to support long life in storage and in use.
- Simplified lubrication
One grease designed to satisfy many different industrial grease requirements.
- Low oil separation tendency
Recommended for use in typical centralized lubrication systems.
DIN 51 502 | ISO 6743-09 | Operating temperature | |
MULTIFAK EP 0 |
GP 0 K-30/KP 0K-30 | ISO-L-XCCEB 0 | –30 up to 120°C with short periods up to 140°C |
MULTIFAK EP 1 |
KP 1 K-30 | ISO-L-XCCEB 1 | |
MULTIFAK EP 2 | KP 2 K-30 | ISO-L-XCCEB 2 |
Always confirm that the product selected is consistent with the original equipment manufacturer's recommendation for the equipment operating conditions and customer's maintenance practices.